Jason's FOR SALE Page
This is where I sell the shit I don't need anymore...

3" Downpipe:
JSM Flanged 3" DP bought from a GP on SyTy.net
This is a one piece steel downpipe that was made on a bender, it is not mandrel bent, but neither was the stock one.
It uses the JSM flange at the turbo that allows you to knock out the service puck and allow the wastegate to dump directly into the DP with no restrictions.
This DP WAS NOT Fabricated by JSM, only the flanges were sourced through them.
Other features of this DP are dual O2 sensor bungs for WBo2 and a race dump with 3 bolt flange at the base
Includes a 3" Stainless Magnaflor cat with 3/8" 3 bolts flanges welded on both ends.

$500 as a package





1 Pair of 92 Typhoon Leather Bucket Seats:

These seats are not made anymore, period!!!
There are no rips or tears anywhere on the seats.
They came out of My 92 Typhoon with 85k miles on it so they are not brand new, but I'd rate them a 7 out of 10.
Obviously, the drivers seat shows more wear than the pass, although really it is only the padding on the outer edge of the seat that you can tell is worn. The leather is all in Excellent condition.
It does have the wear "wrinkles" in it, but no spots where it is worn through, discolored or torn.
All the stitching is in excellent shape and is not separated or pulling apart anywhere.
These seats are charcoal grey in color and have TYPHOON embroidered in silver in the head rest.
The are manual lumbar supports, but the driver's side needs a new hand pumper to inflate the lumber.
Includes all GM floor mounting brackets, GM charcoal grey trim covers.

The only thing I'd say they could use is a professional shampoo and maybe have the drivers seat bottom foam replaced.

$750 OBO + Actual shipping costs from St Louis MO 63026



Shoot me an offer via EMAIL!


OEM SyTy Rear Bumper Support: BENT
This piece was slightly damaged when my wife's car rolled into the back of the Typhoon.
It has the center section behind the license plate cutout for a hidden trailer hitch.
This piece is repairable by a person with reasonable body shop skills.
$75 OBO + Actual UPS Ground Shipping

Stock Take offs:
(Malke offers on any of this stuff)
Alternator: Housing painted black, pulley red. Good for testing or a core for rebuild.
Water Pump
Belt Tensioner: Painted black
92 Ty Transmission dipstick and tube
Lower CCHE heat exchanger
Stock Typhoon Torsion Bars
2 700R4 trans CORES: both have soft parts damage: one is modded already, one is stock untoughed
Typhoon transfercase with slipping viscous: Good for core rebuild

 

EMAIL ME with any questions